Showing posts with label construction. Show all posts
Showing posts with label construction. Show all posts

Sunday, December 4, 2011

Dome Sweet Dome - Housing for the Future



Dome structures made of various materials have a long architectural lineage extending into prehistory. Most people think of domes that sit atop structures like the Capitol Building in Washington, DC or St. Peter's Basilica in Rome.  

A monolithic dome (from Greek mono- and -lithic, meaning "one stone") is a structure cast in a one-piece form. The form may be permanent or temporary and may or may not remain part of the finished structure.  Forms have been made using nearly every common structural material including air pressure supported fabric.


The earliest form of monolithic dome structure could be considered to be the igloo. While it is constructed of blocks of compressed snow, these blocks melt and re-freeze to form a strong, homogeneous structure. The dome-like shape of the igloo exhibits the two major advantages of a dome-shaped structure: great strength, and good insulation. The strength is due to the natural strength of the arch, and the insulation is due to the minimal surface area of a spherical section.

The Inuit's of Canada's Central Arctic, and Greenland's Thule region were the predominant builders of igloos. Architecturally, the igloo is unique in that it is a dome that can be raised out of independent blocks leaning on each other and polished to fit without an additional supporting structure during construction. An igloo that is built correctly will support the weight of a person standing on the roof.  Igloos are energy-efficient. On the outside, temperatures may be as low as −45 °C (−49 °F), but on the inside the temperature may range from −7 °C (19 °F) to 16 °C (61 °F) when warmed by body heat alone.


The first modern monolithic dome structure was built in Provo, Utah and opened in 1963 as an ice skating rink. Called Ream's Turtle after its 1967 conversion into a general store by new owner Paul Ream, the building stood until it was demolished in 2006 for new construction.

Ream's Turtle was built by first creating a mound of dirt in the desired shape of the shell, an ellipsoidal section 240 feet (73 m) long, 160 feet (49 m) wide and 40 feet (12 m) high. The mound was then covered in a grid of rebar, to provide strength, and a layer of concrete approximately 4 inches (100 mm) thick. After the concrete was cured, the dirt was excavated through the doorways, leaving the roof standing in its place. The floor was then poured to finish the structure.


Modern construction differs significantly from the original concrete-over-dirt method. The current methods were developed by three brothers from Idaho: Barry, Randy, and David South. The first dome built using these method was constructed in Shelley, Idaho:
  • A reinforced concrete foundation, or "ring beam", is constructed, defining the shape of the base of the structure.
  • The fabric form, or air form, is attached to the foundation and inflated with an air blower. The air form contains an airlock to allow workers to enter the form while it is inflated.
  • A layer of polyurethane foam is sprayed on the interior of the form. (Its purposes are to give rigidity to the air form, secure the rebar in place, provide support for spraying in the concrete mixture, and insulate the final structure.)
  • Rebar is attached to the outside layer of foam, using clips that are attached to the foam.
  • Several inches of concrete are sprayed over the rebar frame.
  • After the concrete has set, the blower is turned off.
  • The exposed surface of the air form may be left as is, or a surface treatment such as paint, tile, etc., may be applied. (Proper selection of air form material will ensure prevention from long-term degradation due to ultraviolet radiation.)
In instances where necessity requires economical construction for multiple small and basic dwellings, the dome can be built without insulation and the air form can be removed after completion and re-used to build additional domes.

In 1979, David South, president of Monolithic, and Barry South, David’s younger brother, as co-inventors, were awarded a patent for the Monolithic Dome. The USPTO awarded this patent because the structure called a Monolithic Dome was substantially different from all other types of structures, in use, in America. What made it different was its construction process that stipulated using an inflatable Airform, polyurethane foam insulation and steel-reinforced concrete.

The dome, when finished, is earthquake, tornado and hurricane resistant (FEMA rates them as "near-absolute protection" from F5 tornadoes and Category 5 Hurricanes). Recently, a number of monolithic domes constructed using MDI techniques have survived major disasters:
  • Several monolithic domes in Florida survived direct hits by Hurricane Katrina in 2005.
  • Several monolithic domes were in the path of the 2005 and 2006 wildfires in Oklahoma and Texas, and survived with only slight charring of the exterior foam insulation.
  • In 2003, a monolithic dome government building in Iraq survived a direct hit by a 5,000 lb (2,300 kg) bomb. The interior of the structure was totally destroyed, but the dome itself remained standing.

Today, Monolithic is a family of companies sharing a mutual goal: to improve the lives of people worldwide through the introduction and construction of Monolithic Domes, for personal and public use, that are superior in strength, energy-efficiency and cost control. Monolithic Dome Institute (or MDI) is the information-generating and educational branch of the Monolithic family.  Their website is an excellent resource for learning more about this type of architecture and construction technique.

With natural disasters always a consideration in structural safety, exhorbitant energy costs, and sky-rocketing insurance premiums, monolithic domes are a logical answer to humanity's future housing needs.  I urge anyone who is thinking about building a home to do the research on the MDI website.  

Until next time...become the change you imagine.

Sunday, August 24, 2008

The future of housing may lie in the past.

We are frequently confronted with life style decisions that can impact our environment, some more urgent than others. One of the biggest decisions we make with regards to the environment is in our choice of housing. In the United States, the average home emits about four metric tons of carbon dioxide (CO2) equivalent per person per year -- about 17 percent of all U.S. emissions -- according to research by the Environmental Protection Agency.

Conventional building methods often overlook the interrelationships between a building, its components, its surroundings, and its occupants. Conventional buildings consume more of our resources than necessary, negatively impact the environment, and generate a large amount of waste. According to Laurence Doxsey, former Coordinator of the City of Austin Green Builder Program, "a standard wood-framed home consumes over one acre of forest and the waste created during construction averages from 3 to 7 tons." Often, these buildings are costly to operate in terms of energy and water consumption. And they can result in poor indoor air quality, which can lead to health problems.

Green building practices offer an opportunity to create environmentally-sound and resource-efficient buildings by using an integrated approach to design. Green buildings promote resource conservation, including energy efficiency, renewable energy, and water conservation features; consider environmental impacts and waste minimization; create a healthy and comfortable environment; and reduce operation and maintenance costs.

How does alternative housing construction fit into this concept? Alternative housing methods have been available for decades, mostly for financial reasons, I think, but were usually associated with "hippies" or other "eccentrics". Cob, adobe, straw-bale, subterranean, earth-ship, rammed-earth, cordwood, earth bag, salvaged - these are all construction methods that are still being used by people who care about their planet, and can't afford (or don't want) expensive mortgages. Let's look at a few of these alternatives:

Cob -- Building with earth is nothing new to America; the oldest structures on the continent were built with adobe bricks. Cob has been a traditional building process for millennia in Europe, even in rainy and windy climates like the British Isles, where many cob buildings still serve as family homes after hundreds of years. Cob building uses a simple mixture of clay subsoil, aggregate, straw, and water to create solid structural walls, built without shuttering or forms, on a stone platform.

Straw bale -- Straw bale building typically consists of stacking rows of bales on a raised footing or foundation, with a moisture barrier between the bales and their supporting platform. Bale walls can be tied together with pins of bamboo, rebar, or wood (internal to the bales or on their faces), or with surface wire meshes, and then stuccoed or plastered, either with a cement-based mix, lime-based formulation, or earth/clay render. This method generally works best in locations with a hot, dry climate.
Subterranean -- Underground homes, according to Mike Oehler (author of "The $50 & Up Underground House Book"), when properly designed and constructed, provide pleasant surroundings, a better view, and are esthetically pleasing, inside and out. They are weatherproof, soundproof, relatively fireproof, and require less maintenance. Warm in winter, cool in summer, with superior flooring, and the pipes never freeze. They have no foundation, use less building materials, require less labor, and are ecologically sound.

In Cooper Pedy, Australia, the majority of residents live in caverns. Some are left over from opal mines, others are dug out for living spaces. Throughout dry and mountainous northern China, an estimated 40 million people still live in caves or subterranean dwellings.
Earthship -- An earthship refers to a passive solar home made of natural and recycled materials. Designed and marketed by Earthship Biotecture of Taos, NM, the homes are primarily constructed of earth-filled tires, utilizing thermal mass construction to naturally regulate indoor temperature. Earthships are a type of off-grid home, which minimizes their reliance on public utilities and fossil fuels. They are built to utilize the available local resources, especially energy from the sun.

The major structural building component of the Earthship is recycled automobile tires filled with compacted earth to form a rammed earth brick encased in steel belted rubber. This brick and the resulting bearing walls it forms is virtually indestructible. Aluminum cans and glass bottles are a great, simple way to build interior, non-structural walls. Aluminum can walls actually make very strong walls. The 'little bricks' create a cement-matrix that is very strong and very easy to build. Bottles can create beautiful colored walls that light shines through.

Recycled/Salvaged -- The local dump is a great place to look for building materials. Dumps/landfills will sometimes have an area set aside for potentially reusable items, and they encourage people to sort through them. The virtue of recycling used building materials lies in diminishing the need for industry to recreate it. All of the energy that is spent in manufacturing and transporting something can be saved. The raw materials that would be drawn from the earth can be saved. The need to cover the item in the local landfill can be saved. The financial savings to the potential home owner can be significant.

Perhaps the time has come for natural building techniques to become the "norm" rather than the exception. Kelly Hart, who runs the websites Green Home Building and Dream Green Homes wrote an article "Building With Nature" which eloquently addresses the need to return to nature as our guide in construction. In it, Mr. Hart states:
"Building with nature means being aware of how much embodied energy exists
in the materials that we use, so that we don't unnecessarily squander fossil
fuels and contribute to global warming. It means building compactly so as to
not waste materials and energy. It means using materials that are
biodegradable or recyclable. It means designing our homes in ways that use
the sun and the earth to heat and cool them. It means utilizing forms of
renewable energy wherever possible. It means incorporating greenhouses and
naturally cooled pantries in our homes to help feed us."
Until next time...become the change you imagine.